The 'Company' shall mean Revere London The 'Customer' shall mean the person buying /ordering the goods or services for whom the work is to be done. Retention of Title Ownership of the goods or services shall not pass to the customer under any circumstances until the company has received in full (in cash or cleared funds) all sums due in respects of the goods, services and/or labour supplied by the company.
All delivery dates are to be advised as accurately as possible at the time of order. Revere London will always try to keep to the advised dates for a conversion and if delivery will be late will contact the customer to advise. Revere and its associated dealers will not be held liable for failure to deliver by an anticipated date.
On appointment of the order we will call for an initial deposit of 50% of the total order value. This deposit is non-refundable on cancellation by the customer. Payment is accepted by bankers' cheque or bank TT transfer made payable to 'Revere London' Personal or company cheques will only be accepted if agreed in advance with Revere London and are subject to clearance. Vehicles or products will not be released unless full payment has been received.
There will be a 40% surcharge made to all mail order customers on items where there is an asterisk or stated and are pending the return of the original parts in good condition. Value Added Tax (VAT) Prices shown exclude British VAT
We invoice our products with VAT. In order to be accepted for a VAT refund we will need a proof of exportation, issued by HM Customs and excise at the port of exportation.
Refunds will only be made if the form is completed and stamped correctly. If we are exporting our products and you are a registered company within the EU we can place you in a zero-rated category as long as you supply us with proof of your company sales tax number.
Any quotations for shipments are only valid for 1 week after our quotation date due to price fluctuation on air / sea rates. We will send you an offer / quotation for parts including delivery. Please send the correct amount of payment as any discrepancies may prevent invoicing and delivery. Using your own shippers is only allowed if full payment has been received by bank transfer.
Unless any special terms are agreed in writing between the company and the customer, where the Goods are supplied for export from the United Kingdom you shall be responsible (at your cost) for complying with any legislation or regulations governing the importation of the Goods into the country of destination (including obtaining relevant licenses, permits and permissions) and for the payment of any duties and for supplying all relevant details to us where delivery is to be made at your premises. You will also be responsible to check those parts we supply are legally allowed to be installed on your vehicle or a clients vehicle in your country. Unless the goods are to be collected by you or your carrier from our premises, the Goods shall be delivered at your nominated premises (as agreed by us).
Depending on the extent of the conversion it may be necessary for the company to test drive your vehicle, or have the vehicle delivered to specialist sub-contractors i.e. rolling road/bodyshop. In such respect a small amount of mileage may be accumulated. All of the companies' drivers are full insured and will ensure your vehicle is driven with the up most care and attention.
Under the company warranty terms the company is obliged to correct/repair any defective work or products supplied within 12 months of purchase or completed conversion. The warranty does not cover any third party interaction unless authorisation has been given in writing by Revere. The warranty only applies to the original purchaser and is not transferrable. Our warranty does not cover the vehicle when used at any kind of motorsport or track event or used off-road. Our warranty does not cover vehicle transportation costs and all parts must be returned back to the company for inspection before warranty is confirmed.
It is the responsibility of the customer/vehicle owner to conform to regular vehicle safety checks i.e. correct tyre air pressures, wheel bolt torque, oil levels plus all the normal checks outlined by your vehicle manufacture etc. Please re-torque your wheels after having new wheels fitted. Please also check after having wheels fitted you have your locking wheel nut key. Revere does not hold any responsibility for damage incurred to your vehicle or Revere added parts due to customer negligence. When a vehicle has been vinyl wrapped by Revere this must be treated with the upmost care.
Please be aware some of our products cannot be purchased separately, as some products are held for full conversions only. Certain parts are only supplied with a Complete Revere Conversion or proof you have an existing Revere Genuine conversion.
In order to keep it looking at its best for as long as possible, we would recommend that you always hand-wash your wrapped vehicle. Therefore, please take the following precautions when cleaning the vehicle: Do not subject your wrap to the following cleaning systems Pressure washers, Steam cleaners, Industrial scrubbing machines (forecourt car-washes). If you expose your wrap to the above then you run the risk of the following occurring: A pressure washer/steam cleaner will rip holes in the material; an industrial scrubbing machine will scuff the laminate and dull the colors' of the wrap, an industrial scrubbing machine will also lift the edges of the wrap and cause it to peel back. Any damage caused by the above methods is easily identifiable and we cannot be held responsible for any damage caused in this manner. If you take care of your wrap then it will remain in good condition for between two to three years.
Please note: Removing the wrap from your vehicle may in some extreme cases remove original paint. The company is not responsible for any damage incurred during the removal of your wrap.
Aftermarket accessories do not directly affect your existing manufacturer's warranty. However, many people, including vehicle agents/manufacturers themselves do not know the law. We suggest you always talk to your local dealer about manufacturer's aftersales issues with a modified vehicle as very often warranty is open to discretion or interpretation. Revere cannot me held responsible for refusal of any warranty claims due to modified parts being installed to your vehicle.
Revere London and Revere Design a trading name of R-Tec Auto Design Limited.
In October 2003, European Union legislation affecting the motor trade came into force. Its full title is 'Block Exemption regulations 1400/2002' (in short 'BER'). This legislation changes the way cars may be serviced and repaired, and gives motorists a lot more freedom in their decision about who should look after their cars. The BER covers areas such as who can service vehicles other than agents appointed by manufacturers and, more specifically to customers who are considering Aftermarket Products/parts that can be fitted to a vehicle. Below we draw upon in particular the issues that concern the fitting of replacement parts to a vehicle that are not the manufacturer's original equipment.
Where parts used are of matching quality as the component used for the assembly of a motor vehicle. (Our products are often manufactured from a higher quality material than OEM. I.E exhausts: T304-grade stainless steel and are manufactured using internationally-certified practices. Spare parts of 'matching quality' identifies parts in the following way: spare parts made by any undertaking which can certify at any moment that the parts in question match the quality of the components which are or were used for the assembly of the motor vehicles in question.)
Where parts used are of the same specifications and production standards as those used by the Vehicle Assemblers. (A Revere exhaust system is designed to fit to OE mounting parts and components such as catalysts without any modifications (including cutting, welding and bending of any OE parts). Fitting is a simple process, which can be reversed or replaced at any time without causing damage to the vehicle or OE components.) An interesting point is that if the vehicle manufacturer itself offers spare parts of differing quality (e.g. an 'economy' or 'premium line'), he cannot prohibit its contractual partners (i.e. dealers and authorised repairers) from buying spare parts of the same quality from the independent market. The BER also covers service and maintenance during the warranty period and prohibits vehicle manufacturers' warranties from including conditions requiring that all parts used must be the VA's 'original spare parts'.
Every effort is made to ensure all information produced is correct. Revere London shall not be held responsible for typographical errors or errors in product or vehicle information. In the event a product is listed at an incorrect price or with incorrect information (including imagery) Revere London shall retain the right to refuse or cancel any orders placed. In addition to the price listed, the sale of goods or services are subject to value added tax, any other taxes, levies or duties, carriage, insurance costs, loading and unloading costs at order confirmation. Revere price lists and dealer codes are subject to revision without notice but we will only increase the price for the Contract between the date of your order and when we deliver the goods and/or provide the services if there is an increase in the cost of raw materials, labour and/or other production costs, changes in the types or rates of tax contributions or levies.
The quantity and description of the goods and/or the type of services to be purchased by you are set out on the order form/quotation via post or e-mail. We will endeavor to ensure that the goods are in accordance with our current brochure or other published literature relating to our goods and services from time to time and that our publications and websites are up to date in relation to the services that Revere provide.
Where you have ordered goods that require fitting or installation and have not requested the services from us or where we are not able to provide you with the services and we supply only the goods themselves, Revere will not be responsible for installing the goods. If the goods are damaged by any third party during or after the fitting process, we will not be liable to refund or replace the goods and any warranty supplied by us for the goods will be void insofar as any loss or damage that has resulted from the actions of any fitter or any fault in the fitting process. The goods you order (as set out in the Order Form/ quotation) will, as far as possible, be the same in appearance and operation as the demonstration products. We may change the specification of the goods (including substituting parts or materials) if it is necessary to comply with any safety or legal requirements. We will try to minimise any such changes to minor or technical alterations wherever possible and will not change the colour or appearance of the Goods unless we agree it in advance with you.
Parts being removed from vehicles (original or scrap parts) shall be taken over by the contractual partner within a time limit of 2 weeks. After this period of time Revere London does not take responsibility for the storage. A replacement is excluded. The provision does not apply for parts, which have been set off or passed into the ownership of Revere London. If you need to extend the storage period or if you would like your old parts delivered to an address, please submit a request in writing within 8 working days of your vehicle leaving the workshop.
We reserve the right to defer the date of delivery, to cancel the Contract, to reduce the volume of the goods ordered by you or suspend the provision of the services to you (without liability to you) if we are prevented from or delayed in the carrying on of our business due to circumstances beyond our reasonable control including, without limitation, strikes, lock outs or other industrial disputes (whether involving the workforceof the Seller or of any other party), act of God, government actions, war riot,hostilities (whether war be declared or not), armed conflict, terrorist attack, terrorist activity, nuclear, chemical or biological contamination, sonic boom, civil commotion, invasion, revolution, malicious damage, compliance with any law or governmental order, rule, regulation or direction, accident, power failure, breakdown of plant or machinery, fire, flood, storm, disease, epidemic, default of suppliers or subcontractors, difficulties or increased expense in obtaining raw materials, labour, fuel, parts of machinery, or import or export regulations or embargoes. If the event in question continues for a continuous period in excess of 20 days either you or we shall be entitled to give each other written notice to end the contract.
Terms and conditions are subject to change at any time. Revere London shall retain the right to refuse or cancel any orders placed.