Under the company warranty terms the company is obliged to correct/repair any defective work or products supplied within 12 months of purchase or completed conversion. The warranty does not cover any third party interaction unless authorisation has been given in writing by Revere. The warranty only applies to the original purchaser and is not transferrable. Our warranty does not cover the vehicle when used at any kind of motorsport or track event or used off-road. Our warranty does not cover vehicle transportation costs and all parts must be returned back to the company for inspection before warranty is confirmed. Once a wheel has been kerbed the wheel finish warranty is void. Any finish other than finishes undertaken by revere London will void any warranty of the products. Alloy wheels require special cleaning. We strictly suggest the use of commercial wheel cleaners are avoided. Please only use the same soap you would wash your vehicle with. We suggest you should wash your wheels at least twice a week using a sponge. Please do not use pressure washers to wash your wheels as this may damage the finish. If you see any stone chips please clean the area and cover with some clear coat / lacquer with brush.
When using factory TPM (Tyre pressure monitors) sensors either lubricate the valve first. This is to prohibit the caps seizing. (We suggest using the original caps the OEM valves came with.
It is the responsibility of the customer/vehicle owner to conform to regular vehicle safety checks i.e. correct tyre air pressures, wheel bolt torque, oil levels plus all the normal checks outlined by your vehicle manufacture etc. Please re-torque your wheels after having new wheels fitted. Please also check after having wheels fitted you have your locking wheel nut key. Revere does not hold any responsibility for damage incurred to your vehicle or Revere added parts due to customer negligence. When a vehicle has been vinyl wrapped by Revere this must be treated with the upmost care.
It is the owners responsibility to inform their insures before any conversions are undertaken.
Please be aware some of our products cannot be purchased separately, as some products are held for full conversions only. Certain parts are only supplied with a Complete Revere Conversion or proof you have an existing Revere Genuine conversion.
Due to the desirability of our product some vehicles modified may be branded an Revere when it is not a Genuine Revere vehicle. If in doubt please call us on 0207 022 1201 and we can check our warranty system for any information on a vehicle. Any vehicle with a large Revere Conversion 2010> done by Revere will have a chassis plate mounted on the panel under the bonnet.
When having large wheels installed this may affect the general ride of the vehicle. We often give you suggested alternative tyre options. Please note if you chose a larger option this may slightly change the rolling diameter which affects the speedometer. Revere cannot be held liable for incorrect readings. Also when larger wheels are installed, you will need to adopt the way you drive the vehicle i.e. avoiding pot holes and mounting kerbs quickly as this will cause damage to your wheels.
Revere suggests you have your vehicle alignment done every 6 months.
Caring for your Wrap
In order to keep it looking at its best for as long as possible, we would recommend that you always hand-wash your wrapped vehicle. Therefore, please take the following precautions when cleaning the vehicle: Do not subject your wrap to the following cleaning systems Pressure washers, Steam cleaners, Industrial scrubbing machines (forecourt car-washes). If you expose your wrap to the above then you run the risk of the following occurring:- A pressure washer/steam cleaner will rip holes in the material; an industrial scrubbing machine will scuff the laminate and dull the colors' of the wrap, an industrial scrubbing machine will also lift the edges of the wrap and cause it to peel back. Any damage caused by the above methods is easily identifiable and we cannot be held responsible for any damage caused in this manner. If you take care of your wrap then it will remain in good condition for between two to three years.
Please note: Removing the wrap from your vehicle may in some extreme cases remove original paint. The company is not responsible for any damage incurred during the removal of your wrap.
Who you need to inform about your wrap:
1] Insurance: It is important that you advise your insurance company that you have had your vehicle part/fully wrapped. This way should you be in the unfortunate position of having an accident or need to claim on your insurance company then they are aware of the costs and materials that will need to be replaced.
2] DVLA: The DVLA should only be contacted should the car be a permanent colour change. As vehicle wraps are temporary there is no need to advise them of your wrap.
3] Police: As part of the police's vehicle database, your car registration is linked to the make, model and colour of your vehicle. If the police do a registration number check they may stop you and ask questions regarding the colour. It is very easy to demonstrate that the vinyl is temporary and not the true colour - simply lift your bonnet or your door shuts (if not wrapped).
Aftermarket accessories do not directly affect your existing manufacturer's warranty. However, many people, including vehicle agents/manufacturers themselves do not know the law. We suggest you always talk to your local dealer about manufacturers after sales issues with a modified vehicle as very often warranty is open to discretion or interpretation. Revere cannot be held responsible for refusal of any warranty claims due to modified parts being installed to your vehicle. We suggest you speak to your local main dealers so see their take on this situation.
In October 2003, European Union legislation affecting the motor trade came into force. Its full title is 'Block Exemption regulations 1400/2002' (in short 'BER'). This legislation changes the way cars may be serviced and repaired, and gives motorists a lot more freedom in their decision about who should look after their cars.
The BER covers areas such as who can service vehicles other than agents appointed by manufacturers and, more specifically to customers who are considering aftermarket Products/parts that can be fitted to a vehicle. Below we draw upon in particular the issues that concern the fitting of replacement parts to a vehicle that are not the manufacturer's original equipment.
Where parts used are of matching quality as the component used for the assembly of a motor vehicle. (Our products are often manufactured from a higher quality material than OEM. I.E exhausts: T304-grade stainless steel and are manufactured using internationally-certified practices. Spare parts of 'matching quality' identifies parts in the following way: spare parts made by any undertaking which can certify at any moment that the parts in question match the quality of the components which are or were used for the assembly of the motor vehicles in question.)
Where parts used are of the same specifications and production standards as those used by the Vehicle Assemblers. (A Revere exhaust system is designed to fit to OE mounting parts and components such as catalysts without any modifications (including cutting, welding and bending of any OE parts). Fitting is a simple process, which can be reversed or replaced at any time without causing damage to the vehicle or OE components.) An interesting point is that if the vehicle manufacturer itself offers spare parts of differing quality (e.g. an 'economy' or 'premium line'), he cannot prohibit its contractual partners (i.e. dealers and authorised repairers) from buying spare parts of the same quality from the independent market. The BER also covers service and maintenance during the warranty period and prohibits vehicle manufacturers' warranties from including conditions requiring that all parts used must be the VA's 'original spare parts'. THE EUROPEAN COMMISSION DECLARED THAT SUCH CLAUSES IN A WARRANTY DOCUMENT WOULD REPRESENT 'AN UNJUSTIFIED RESTRICTION FOR THE CONSUMER'
You may cancel the contract no later than the earlier of: 5 days from placing your order; or a minimum of 48 hours before the date on which the Goods
are delivered to you or the day immediately preceding the date on which the Services are commenced, you may also cancel the contract if we are in material breach of the terms and conditions and you notify us of such breach and we fail to remedy any such breach within 21 days of receiving your notification.
If you cancel the contract according to condition then you must return any goods held by you to us at your own cost. We may collect Goods from you again at your own cost. You must keep any Goods to be returned to us in good condition and the original packaging. Upon cancellation we will return any money that you have paid to us but where you have paid us a deposit: We reserve the right to retain your deposit in full; invoice you for any other reasonable charges and expenses we have incurred in respect of the manufacture of the Goods and/or the supply of the services invoice you for any costs or expenses associated with us collecting the goods from you.
Every effort is made to ensure all information produced is correct. Revere London shall not be held responsible for typographical errors or errors in product or vehicle information. In the event a product is listed at an incorrect price or with incorrect information (including imagery) Revere London shall retain the right to refuse or cancel any orders placed. In addition to the price listed, the sale of goods or services are subject to value added tax, any other taxes, levies or duties, carriage, insurance costs, loading and unloading costs at order confirmation. Revere price lists and dealer codes are subject to revision without notice but we will only increase the price for the Contract between the date of your order and when we deliver the goods and/or provide the services if there is an increase in the cost of raw materials, labour and/or other production costs, changes in the types or rates of tax contributions or levies.
The quantity and description of the goods and/or the type of services to be purchased by you are set out on the Order Form / quotation via post or e-mail. We will endeavour to ensure that the goods are in accordance with our current brochure or other published literature relating to our goods and services from time to time and that our publications and websites are up to date in relation to the services that Revere provide.
Where you have ordered goods that require fitting or installation and have not requested the services from us or where we are not able to provide you with the services and we supply only the goods themselves, Revere will not be responsible for installing the goods. If the goods are damaged by any third party during or after the fitting process, we will not be liable to refund or replace the goods and any warranty supplied by us for the goods will be void insofar as any loss or damage that has resulted from the actions of any fitter or any fault in the fitting process. The goods you order (as set out in the Order Form/ quotation ) will, as far as possible, be the same in appearance and operation as the demonstration products. We may change the specification of the goods (including substituting parts or materials) if it is necessary to comply with any safety or legal requirements. We will try to minimise any such changes to minor or technical alterations wherever possible and will not change the colour or appearance of the Goods unless we agree it in advance with you.
SCRAP PARTS / OLD WHEELS
Parts being removed from vehicles (original or scrap parts) shall be taken over by the contractual partner within a time limit of 2 weeks. After this period of time Revere London does not take responsibility for the storage. A replacement is excluded. The provision does not apply for parts, which have been set off or passed into the ownership of Revere London. If you need to extend the storage period or if you would like your old parts delivered to an address, please submit a request in writing within 8 working days of your vehicle leaving the workshop.
We reserve the right to defer the date of delivery, to cancel the Contract, to reduce the volume of the goods ordered by you or suspend the provision of the services to you (without liability to you) if we are prevented from or delayed in the carrying on of our business due to circumstances beyond our reasonable control including, without limitation, strikes, lock outs or other industrial disputes (whether involving the workforce of the Seller or of any other party), act of God, government actions, war riot, hostilities (whether war be declared or not), armed conflict, terrorist attack, terrorist activity, nuclear, chemical or biological contamination, sonic boom, civil commotion, invasion, revolution, malicious damage, compliance with any law or governmental order, rule, regulation or direction, accident, power failure, breakdown of plant or machinery, fire, flood, storm, disease, epidemic, default of suppliers or subcontractors, difficulties or increased expense in obtaining raw materials, labour, fuel, parts of machinery, or import or export regulations or embargoes. If the event in question continues for a continuous period in excess of 20 days either you or we shall be entitled to give each other written notice to end the Contract.
Terms and conditions are subject to change at any time. Revere London shall retain the right to refuse or cancel any orders placed.